Norseman™ Drill & Tool Logo

Product Catalog – PDFs

America´s Finest High–Speed Cutting Tools™

Substantially longer cutting life
The nitro-carburized flute has an increased Rockwell hardness.
Cuts harder materials
The flatter point takes a smaller chip. More torque is directed to a smaller area. This allows drilling into materials with hardness of over 30 on the Rockwell "C" scale.
Stops drill walking
The split point design gives accurate starting without the use of a center punch.
Holds tighter hole size
The split point design is self centering. This limits the normal oversize drilling characteristics.
Runs cooler, uses less torque
135° point takes a smaller chip resulting in less heat. Friction is reduced by amber gold surface treatment.
Stops chuck slippage
Flats on drill shanks allow easy positive chuck grip.

 

Norseman™ Drill and Tool - Drill Bits
HSS Super Premium
Cryo/Nitride Jobber Length
135° Split Point, the
nitride coating creates
a case hardened surface
that is resistant to rust, heat
and extends tool life

Norseman™ Drill and Tool - Taps and Dies
Spiral Point Taps
Are designed for machine
tapping through holes.
Straight Flute Hand Taps
can be used by hand
or tapping under power.


Norseman™ Drill and Tool - Annular Cutters and MDB Section
MBD/Annular Cutters
Carbide Tipped Cutter
outperforms high–speed steel
annular cutter. MBD40 is a light,
yet powerful magnetic drill.
Norseman™ Drill and Tool - Specialty Tools
Specialty Tools
Introducing the
VORTEX-POINT™ with a unique tip
geometry. Norseman Drill offers a
wide range of specialty tools.

Norseman Drill and Tool - Carbide Burrs Section
Premium Carbide Burrs
Double Cut is the most popular
burr for ferrous applications.
Aluma cut is used on aluminum,
non-ferrous metals, soft steel,
reinforced plastics and other
soft materials.

Norseman Drill and Tool - Cutting Tool Sets Section
Cutting Tool Sets
RED - Ultra Dex 29pc.
Cryo Nitride
Jobber Length Drills.
Variety of sizes ranging
from 4pc. up to 115pc. sets.


Norseman Drill and Tool - Display, Cabinets and Indexes
Displays, Cabinets
Cost effective tool management
and storage systems,which
eliminates wasted time
searching
and is the safest
way to store sharp tools
.

Norseman Drill and Tool - Definition of Coating
Drill Bit Coatings
TiN, TiCN and TiAIN Coating
hardness is measured in HV
(Hardness in Vickers) Heat treat
M2 as base drills before
coating would measure
880 HV (65RC).

DRILL, REAMER & TAP Products —

18 pc. Spiral Point, NC Tap & Drill Set - Norseman Drill
CN-TECH™ Cryogenic Nitrided HSS Products Set
Taper Pipe Taps - Regular & Interrupted - Norseman Drill and Tool
CAR Reamers Fast Spiral 3-Flats on Shank - Norseman Drill
High Performance Reduced Neck Spiral Point Gold Oxide, Titanium Nitride, Titanium Carbon Nitride, Titanium Aluminum Nitride
Left Hand Heavy Duty Jobber Length - Norseman Drill and Tool
10pc Screw and Bolt Extractor Set - Norseman Drill and Tool
Ultra Bit™ Multi-Diameter 3-flats on Shank - Norseman Drill
29pc. Blaze Orange Ultra Dex 135° Split Point NAS 907B Jobber Length - Norseman Drill