Norseman™ Drill & Tool Logo

Standard Flute & Fast Spiral Reamers

America´s Finest High–Speed Cutting Tools™

PRODUCT CATALOG >> Standard Flute & Fast Spiral
Type 50-AG HSS Car Reamers Standard Flute 3-flats on Shank
    Type 50-AG Car Reamer Standard Flute
    Reamers are especially designed for the reaming of structural steel plates commonly found in truck frames, rail cars, bridges, and pressure vessels.

    All tools are constructed with left-hand spiral & right-hand cut.

    For use in enlarging previously formed OR drilled holes.

    Proudly manufactured in the USA
              with globally sourced material
    Adobe Acrobat PDF Download: PDF

    Car Reamers — Standard Flute
    Diameter Inches Min. Staring Hole Size Overall Length
    3/8" 5/16" 4 5/8"
    1/2 3/8" 5 7/8"
    9/16" 7/16" 5 7/8"
    5/8" 7/16" 6 3/8"
    11/16" 15/32" 6 3/8"
    3/4" 1/2" 6 7/8"
    13/16" 35/64" 6 7/8"
    7/8" 19/32" 6 7/8"
    15/16" 5/8" 6 7/8"
    1" 7/8" 6 7/8"
    1 1/4" 1" 6 7/8"


Type 51-AG HSS Car Reamer Fast Spiral Hole Buster™ 3-flats on Shank
    Type 51-AG Car Reamer — Fast Spiral, Hole Buster™
    51-AG, with the fast spiral, is the more aggressive of the two styles. It also will fit the needs of users who prefer a stop collar.

    Left-hand spiral eliminates the tendency of the reamer to pull itself into holes.

    Proudly manufactured in the USA
              with globally sourced material
    Adobe Acrobat PDF Download: PDF

    Car Reamers — Fast Spiral
    Diameter Inches Min. Staring Hole Size Overall Length
    5/16" 17/64" 4 5/8"
    3/8" 5/16" 4 5/8"
    7/16" 3/8" 5 7/8"
    1/2" 3/8" 5 7/8"
    9/16" 7/16" 5 7/8"
    5/8" 7/16" 6 3/8"
    0.652 15/32" 6 3/8"
    11/16 15/32" 6 3/8"
    3/4" 1/2" 6 7/8"
    0.776 1/2" 6 7/8"
    13/16" 35/64" 6 7/8"
    7/8" 19/32" 6 7/8"
    15/16" 5/8" 6 7/8"
    1" 7/8" 6 7/8"
    1 1/16" 7/8" 6 7/8"
    1 1/4" 1" 6 7/8"

 


Norseman Drill reamers should be ran at 1/2 the R.P.M. suggested for a corresponding twist drill size.

Coolant feeding reamers: Coolant or cutting tool lubricant induced thru the reamer should be utilitized when possible. Benefits include better finishes, superior tool life and the ability to increase speeds and feeds.

All tools are constructed with left-handspiral and right-hand cut. The left-hand spiral eliminates the tendency of the reamer to pull itself into the holes.

DRILL, REAMER & TAP Products —

18 pc. Spiral Point, NC Tap & Drill Set - Norseman Drill
CN-TECH™ Cryogenic Nitrided HSS Products Set
Taper Pipe Taps - Regular & Interrupted - Norseman Drill and Tool
CAR Reamers Fast Spiral 3-Flats on Shank - Norseman Drill
High Performance Reduced Neck Spiral Point Gold Oxide, Titanium Nitride, Titanium Carbon Nitride, Titanium Aluminum Nitride
Left Hand Heavy Duty Jobber Length - Norseman Drill and Tool
10pc Screw and Bolt Extractor Set - Norseman Drill and Tool
Ultra Bit™ Multi-Diameter 3-flats on Shank - Norseman Drill
29pc. Blaze Orange Ultra Dex 135° Split Point NAS 907B Jobber Length - Norseman Drill